Friday, March 21, 2008 10:39 PM

Okaaay!
This post is dedicated to the lesson on copper plating.

This is not the first time I've done it because i've alr done it in MJC!
WHOOHOHOOOO~
Of course, its a Jc, and the process took hoursss and the equipment used are very uh...
Sophisticated? ahahha

It's aka electroplating, and there must be 2 objects.
It's not a one man show.
Annnd electricity is involved, to be able to develop the negative and positive charge between the metals.
The metals must be placed in a liquid, and the liquid must be the liquid form of the anode.

MJC learning journey

Equipments

Setting it up

Bluey liquidy thingy. Its.... COPPER SULPHATE!

There's a chain and a mjc badge in the copper sulphate now, hah

Unique badge

.
.
.
.
.
.


Back to NAS!

Set up

Putting the anode and cathode inside..

Waiting...

Tadaaa!

Good uses
I got this from my brother because I cannot find any on the net. LOL
1) Prevent rust
2) Makes the suface look nicer? :O
3) Protects the metal

Bad bad bad bad
1) Waste time just to make the metal look nicer. LOL
2) Waste money also.
3) Waste electricity
4) Waste the liquid form of the anode

Its practically just wasting things? LOL!!!!!

Okay I don't think I still have anything else to post.
Taaaa


Friday, February 29, 2008 5:16 AM

YAY HI HAPPY 29TH FEBRUARY!
See you 4 years later!

Alright, let's blogggggg.

1. What did I do to balance the compounds?
Hmm, I write them all out,
The first step is to compare both sides of the equations.
See which was extra, jot it down
Then add up all the extras one, see if it becomes a compound :O
This will thus result in the same number of elements in each compound on both the left and right sides of the equation.

2. DOs/ DON'TS
Always write out the chemical formula to be able to compare easily between compounds.
Always double check the number of elements in each compound

Don't add in a compound which is not the same as the ones already in the equation
Don't remove any compound! :O

3. Why is it importanttttttttt
If it is not balanced, there would be insufficient elements to make up the compounds on the right hand side of the equation. Therefore the compounds may not be formed or either that there would be different elements rather than compounds. >Failure in experiment :O Something like that?

TEST!
Ooh for the test(1) I scored 32/40
I think it was quite well done, hHhahaha.

Test(2), I scored 30/37, aka 32/40 also.
There could be much much much more improvement!
I should have been more precise in answering in the qns.

And I hope that there should be more activities ;/


Sunday, February 3, 2008 12:05 AM

3 concepts I've learnt

} The heating and cooling curve, why is there a straight line in the curve and why isn't it just a consistent curve

} The changes undergone by particles during changes of states, and esp. the keywords to use when answering an answer. (Forces of attraction, kinetic energy, movement of particles and so on)

} More on sublimation and other processes, and their examples! :O

INDEPENDENT RESEARCH!

I'll be focusing on phones. ALMOST everyone uses phones everyday, for various uses such as SMSing, playing games and the most basic thing, calling people. I'm going to venture back in time and find out how phones were like in the past, as well as go into the future, to show you on how future phones will be like. From the simplest technology of a single function to the complicated means of adding mp3, camera and even touch screen functions to the phones, this journey is sure going to an exciting one for me HEHEHEH! :D


Friday, January 25, 2008 4:19 AM

Reflections time! :o



3 concepts I learnt
3. The particle arrangement in solids, liquids and gases and how they change in terms of volume or positions or how they move around when there is a change of state
>Solid particles are packed tightly, in an orderly arrangement and vibrate
>Liquid particles move past each other and does not have an regular arrangement, but are close together
>Gas particles are well separated with no regular arrangement and they move freely at high speeds



2. The definitions of exothermic and endothermic processes
>Exothermic : When heat is removed/given out to the surroundings, Example: FREEZING
>Endothermic : When heat is taken in from surroundings, Example: MELTING



1. Why is there a straight line in the graph when showing heating/cooling
>Heating: The heat energy is taken in to break the attractive forces
>Cooling: The heat energy is given out to strengthen the attractive forces between particles



2 Things I enjoyed :D

2. The activity in the music room! Hhehehe all of us were particles, and it was very entertaining.

1. The 'teacher' thing that happened in the lab today, oh and Syahid was chosen! :o But he could have spoke clearer into the mic.

1 feedback/ area for development



1. More class activities hahahhahahhaha






SKIT TIME! :B






Friday, January 18, 2008 11:02 PM

Reflections :D

3 things I've learnt

3 Why do we cry when chopping onions :O
-It releases some gas that irritates the water in our eyes, our eyes tries its bests to remove it. (Is it? LOL)

2 Information about the particles in solid, liquid and gas.

1 When kinetic energy increases, the force of attraction between the particles decreases, and vice versa.

2 thing I enjoyed

2 Doing the self learning worksheet :DDDDD

1 The presentation

1 feedback/comments

1 Heheh, maybe the teachers can check if the websites are available before printing it out

Thats all :D



Monday, January 14, 2008 4:49 AM

Today we got into groups~
For some science worksheet.

2 people had to move around in some circle,
and the other 2 were to sit at the places and explain to others who came.

The people were called

EXPERTS! HEHHEHEHE.

Me and elly took qns 6-10
It was so interactive~

We should do this more often.


Friday, January 11, 2008 4:23 AM


HI!!!!!!!!!!!!!!!!!!!!!!!!!!!

Mdm Riza says that we don't need to be too strict in our style of writing,
SO RIGHT,
I'll start posting like I do on my normal blog.

Today we did the experiments on

ACTIVITY 12.8
ph and universal indicators

I'll like write down what we did then do the reflections on the 3,2,1 format.

1. Colour of universal indicator in neutral solution
-Pour 25cm3 of distilled water into a clean beaker.
-Add few drops of universal indicator and stir.

The distilled water turned light yellow,
But I thought it was supposed to be like
GREEEEN,
Because its like distilled water, netural~~

AND IT TURNED OUT
That it is because we didn't add in enough indicator LOL.

2. Colour of universal indicator in an acidic solution
-Add a few drops of sulphuric acid from the above beaker ^


IT TURNED like orangey-pink or pinky-orange.
Ok, orangey-pink sounds nicer.

And we continue adding until no more colour change,


AND IT TURNED RED! :D

3. Colour of universal indicator in an alkaline solution
-New beaker,
-Pour in 25cm3 of distilled water
-Add in a few drops of universal indicator and stir~~

It turned light yellow, LIKE IN STEP 1, LOL

-Add in a few drops of dilute hydroxide from the above beaker^



It turned TURQUOISE! nice colour yay.

4. Colour changes of universal indicator when in acidic solution and alkaline solution when mixed

-Using a dropper, add in the ACIDIC solution from the above tests^ to the ALKALINE solution from the above tests^

WHICH IS LIKE, SO COOL!!!


From purple to dark blue
It's supposed to turn to neutral colour.
Mdm Riza said that because there's probably not enough acid or it's not strong enough or something like that.

OK.
REFLECTION TIME!!!!!!!!! :D

3 concepts I learnt
3 Hydrogen gas is formed when acids react with metals
2 Each meaning of the colours of the Methyl orange/ Phenolpthalein/ Universal indicator (As in, acidic is what colour and alkaline is what colour and neutral also.)
1 The meaning of neutralization!!! When acid + alkali, it will be neutralized, ohhhh. (Sorry, I'm a bit slow)

2 things I enjoy :D
2 I enjoy the part where I "set fire" to the bunsen burner as it was my first time~ and the part where I lighted the splint, LOL.
1 The other part was the whole of activity 12.8 as its so fun seeing the whole colour change thing.

1 Area for development
1 We should not stay and wait forever for something to happen when nothing is going to happen -.-, we should take action! Such as redoing.

OK END OF POST! :D